Inquiry For Liaison Service
Sector abcRailways Transport ServicesTender ValueN.A.
LocationPunjab - India Ref.No71712428
Closing Date08 - Jul - 2024
Supply of steel sheet (five sizes)
steel sheet of size 15x2500x6400mm., as per drawing din en 10025-5 s355 j2w+n. specification for ultrasonic testing of steel plates shall be astm-a-578(reapproved 2001). the acceptance standard shall be "level b" (para 8 of astm-a-578) with frequency 100% (all the plates shall be ut testing),scanning shall be continuous over 100% of plate surface., packing instruction mild / corten/ en steel coils, sheets and plates- (a) mild, en and corten steel sheets in coil form. the coil shall be protected in reasonably good condition to withstand normal handling hazard during transit with the following provision as the barest minimum i) the whole coil should be wrapped with double layer of water proof paper and a biodegradeable plastic sheet of suitable thickness. ii) the inner edge of the coil should be protected by gi ring followed by another iron ring. iii) outer edge of the coil should be wrapped with gi ring. iv) coil should be securely strapped with minium 5 steel bands through the eyes of the coil and minium 3 steel bands on the circumference of the eye. v) hot rolled coils shall be supplied with rust preventive oil coating on the outer layer, inner layer and on the both edges. vi) coils processed through pickling and or skin passing or cold rosteel sheet of size 8x2500x4500mm., as per drawing din en 10025-5 s355j2w+n.specification for ultrasonic testing of steel plates shall be astm-a-578(reapproved 2001). the acceptance standard shall be "level b" (para 8 of astm-a-578) with frequency 100% (all the plates shall be ut testing),scnanning shall be continuous over 100% of plate surface., packing instruction mild / corten/ en steel coils, sheets and plates- (a) mild, en and corten steel sheets in coil form. the coil shall be protected in reasonably good condition to withstand normal handling hazard during transit with the following provision as the barest minimum i) the whole coil should be wrapped with double layer of water proof paper and a biodegradeable plastic sheet of suitable thickness. ii) the inner edge of the coil should be protected by gi ring followed by another iron ring. iii) outer edge of the coil should be wrapped with gi ring. iv) coil should be securely strapped with minium 5 steel bands through the eyes of the coil and minium 3 steel bands on the circumference of the eye. v) hot rolled coils shall be supplied with rust preventive oil coating on the outer layer, inner layer and on the both edges. vi) coils processed through pickling and or skin passing or cold rsteel sheet of size 10x2500x6800mm., as per drawing din en 10025-5 s355 j2w+n. specification for ultrasonic testing of steel plates shall be astm-a-578(reapproved 2001). the acceptance standard shall be "level b" (para 8 of astm-a-578) with frequency 100% (all the plates shall be ut testing),scanning shall be continuous over 100% of palte surface., packing instruction mild / corten/ en steel coils, sheets and plates- (a) mild, en and corten steel sheets in coil form. the coil shall be protected in reasonably good condition to withstand normal handling hazard during transit with the following provision as the barest minimum i) the whole coil should be wrapped with double layer of water proof paper and a biodegradeable plastic sheet of suitable thickness. ii) the inner edge of the coil should be protected by gi ring followed by another iron ring. iii) outer edge of the coil should be wrapped with gi ring. iv) coil should be securely strapped with minium 5 steel bands through the eyes of the coil and minium 3 steel bands on the circumference of the eye. v) hot rolled coils shall be supplied with rust preventive oil coating on the outer layer, inner layer and on the both edges. vi) coils processed through pickling and or skin passing or cold rosteel sheet of size 12x2500x6300mm., as per drawing din en 10025-5 s355 j2w+n. specification for ultrasonic testing of steel plates shall be astm-a-578(reapproved 2001). the acceptance standard shall be "level b" (para 8 of astm-a-578) with frequency 100% (all the plates shall be ut testing),scanning shall be continuous over 100% of plate surface., packing instruction mild / corten/ en steel coils, sheets and plates- (a) mild, en and corten steel sheets in coil form. the coil shall be protected in reasonably good condition to withstand normal handling hazard during transit with the following provision as the barest minimum i) the whole coil should be wrapped with double layer of water proof paper and a biodegradeable plastic sheet of suitable thickness. ii) the inner edge of the coil should be protected by gi ring followed by another iron ring. iii) outer edge of the coil should be wrapped with gi ring. iv) coil should be securely strapped with minium 5 steel bands through the eyes of the coil and minium 3 steel bands on the circumference of the eye. v) hot rolled coils shall be supplied with rust preventive oil coating on the outer layer, inner laye
If you are a new user, then please register, it's Free and then fill the form below.

If you are registered with us, just fill the form below, we will get back to you shortly.


All fileds marked with '*' are compulsary.
Email Id : *
Comments: *
 Login/Register
Members/Visitors Login to continue
 Email Id:
 Password:


 Forgot Password?
 Tenders by Industry
Skip Navigation Links.
Expand Wood Paper and Paper Products TendersWood Paper and Paper Products Tenders
more  »
Tenders by Ownership
Central Government/Public Sector Tenders
Co-operatives Tenders
Corporations/ Associations/ Others Tenders
Education & Research Institutes Tenders
Joint Sector Tenders
Non classified Tenders
Private Sector Tenders
Research Institutes Tenders
State Government Tenders
Trust Tenders
 Tenders by State in India
Andhra Pradesh Tenders
Delhi Tenders
Gujarat Tenders
Madhya Pradesh Tenders
Maharashtra Tenders
Rajasthan Tenders
Tamil Nadu Tenders
Uttar Pradesh Tenders
West Bengal Tenders
more  »